How To Find Subnet Mask On Samsung
Network Settings
This choice is setting the Network Settings functions.
|
Tap > from the home screen or .
Ethernet
Feature | Description |
---|---|
You tin can enable/disable ethernet port. | |
You can select the speed rate of ethernet. | |
Shows the Mac address of the machine. | |
Yous tin can set the IP setting. | |
You tin set the setting. | |
You lot can configure the WINS server. | |
You can set the machine to brandish the IP address on the Home screen. | |
Yous can enable/disable IPv6 protocol. | |
You can ready the IPv6 accost types. | |
You can gear up the DHCPv6 configuration. | |
Show the DHCP Unique Identifiier. | |
Y'all can enable/disable 802.1x Security. | |
You tin select the authentication algorithm to employ. | |
Show the DHCP Identity Association Identifier. |
TCP/IPv4
Yous tin can gear up IPv4 settings.
-
:Yous can choose the method for allocating IP addresses.
-
: Select to enter IP accost/Subnet Mask/ Gateway Accost manually.
-
: IP address/Subnet Mask/ Gateway Address are automatically allocated by the BOOTP Server.
-
: IP address/Subnet Mask/ Gateway Address are automatically allocated past the DHCP Server.
-
-
: You can configure the DNS server.
-
:Enter the host name. You tin can enter up to 63 characters. Default proper noun is "".
-
:Enter the domain name. You can enter up to 128 characters.
-
:Enter the address of the DNS server you want to apply primarily.
-
:Enter the address of the DNS server you desire to use equally an alternative.
-
:If you desire to apply, bank check the checkbox(es) of dynamic DNS registration. If this choice is checked, the machine registers its host proper noun and domain name to configured DNS servers dynamically. Also, if this option is checked and DHCP is selected, DHCP FQDN options are automatically disabled.
-
-
:Yous can configure the WINS server. WINS is used in the Windows operating organization. Select this selection.
-
:Y'all can set the car to display the IP address on the Notification Bar. If yous select this choice the IP address will bear witness on the Notification Bar.
TCP/IPv6
You lot can gear up the IPv6 settings.
-
:Tap to employ IPv6 protocol in the system. Reboot the machine to apply the change.
-
:Shows the IPv6 accost types.
-
:This is an IPv6 accost starting with a prefix value FE80. This accost has local link telescopic and is automatically generated.
-
:This is an IPv6 address which is formed by router advertised prefix and interface identifier. On a interface like Ethernet, interface identifier is usually derived from the Mac address of the machine. The advertised prefix depends on the router configurations.
More one address may be configured for the router advertisement, but only ane will be displayed in the brandish screen.
-
:This is an IPv6 address which is caused by a DHCPv6 server.
-
:This is an IPv6 accost which an administrator tin configure manually.
-
-
:Select the DHCPv6 configuration you want to usa.
-
:DHCPv6 is enabled when a router advertises to utilize DHCPv6.
-
:Regardless of router advertisement, use DHCPv6 to acquire an IPv6 address.
-
:Disables DHCPv6.
-
-
:Show the DHCP Unique ldentifier.
-
:Show the DHCP Identity Clan Identifier.
802.1x
You can enable 802.1x authentication, which is a port-based authentication. If this authentication is enabled, the auto is not allowed to access through the protected side of the network until the machine is authorized. Use this characteristic to protect your network.
-
:Check to enable this feature.
-
:Select the hallmark algorithm to use.
-
:Offers minimal security. The MD5 hash office is vulnerable to lexicon attacks, and does not support key generation.
-
:Recommended for users who only intend to apply Microsoft desktop clients and servers. For other users, it is not recommended.
-
:MS-CHAPv2 provides two-way hallmark between peers by combining a peer Claiming message with the Response packet and an authenticator Response bulletin on the Success packet.
-
:This is used to provide secure communication over the Internet between a client and server.
-
Network Protocol
You can enable/disable what y'all want functions as beneath list.
Feature | Description |
---|---|
You tin enable/disable each functions. | |
Network Security
You can enable and configure these options in SyncThru™ Web Service only(come across Security tab). |
Characteristic | Description |
---|---|
You can disable IPSec if it is turned on in SyncThru™ Web Service. | |
You can disable network filtering options if it is turned on in SyncThru™ Spider web Service. |
-
:You can disable IP security settings.
-
:
-
: Disable MAC filtering.
-
: Disable IPv4 filtering.
-
: Disable IPv6 filtering.
-
Source: http://www.samsungsetup.com/ts/manual/Samsung%20M458x%20Series/English/manual/BABIAIFG.htm
Posted by: pullumthempling.blogspot.com
0 Response to "How To Find Subnet Mask On Samsung"
Post a Comment